Product introduction:
Simple type foam fire extinguisher,
Small size, easy to carry effective,
Do not take up place
With good insulation performance,
Fire Rate and Class
Can be used to extinguish: Class A fire solid material fire (normal),
Class B fire (combustible liquid fire),
Class C fire (fire gases and vapors),
E class fire electrical material (with fire), etc.
Fire extinguishing Features
Suitable for all kinds of models to carry, convenient and safe.
This product is simple and easy fire extinguisher,
Built-in membrane foam extinguishing agent, non-toxic, tasteless, no corrosion,
No pollution and secondary pollution
100% biodegradable,
No special clean-up after using,
Application:
Car, vehicles, ships, family, hotel, office, shopping center.
This product can quickly save at the beginning of class A and class B fires,
You can also save the general electrical equipment,
Fire extinguishing distance is not less than 1 m, are characteristic of rapid fire, cooling, fight again.
This article adopts the binary package spray cans,
Arbitrary profile injection can be all round 360 degrees, its driving gas is compressed air, not discharged with a fire extinguisher, meet the
Requirements of the protection of atmospheric ozone layer of the Montreal protocol.
Shipping Noted:
This product is non-combustible, not explode, use, storage, transportation safety and reliable.
How to use
When using 2-3 meters away from the flame,
Remove the safety pin, , aim the nozzle with fire department or the oil level of tangential,
Press the button. Fire can be. The operation is very agile.
Remind
Once the opened, a fire extinguisher shall not repeat use, filling.
When using abandoned after burst of tank, first let the preset gas.
Use method
1, from the bottom of the extinguisher began to tear the plastic packaging;
2, after pressing blocks along down to open the safety helmet;
3, press the yellow button;
4, from 1.5 m to 2 m away from the fire,
Spay fire Effective injection time: 8 s
Working temperature: - 20 ~ + 55 degree
Drive gas: Nitrogen 1.0 MPa (20 degree)
Electric insulation performance: ≤ 36 kv
Audited Supplier 
){kind=link}
){kind=link}