Dry Chemical Powder Fire Extinguisher, 8kg DCP Fire Extinguisher, Monoammonium Phosphate Dry Chemical Powder manufacturer / supplier in China, offering 8kg ABC Dry Chemical Powder Fire Extinguishers (MFZL8), 65mm 2.5 Inch Brass Fire Hose Angle Valve, 25kg to 100kg Wheeled ABC Bc Dry Powder Fire Extinguishers and so on.
|Min. Order / Reference FOB Price||500 Pieces||US $11.67/ Piece|
|Production Capacity:||500, 000 Pieces Per Month|
|Transport Package:||Carton Size: 33*17*59.5cm G. W: 22.5kg|
|Payment Terms:||L/C, T/T|
|Type:||Portable Fire Extinguisher|
|Certification:||GB8013-2005, CCC, CE|
|Portable Extinguisher:||Portable Dry Powder Fire Extinguisher|
1. Cylinder Size: D162*H495mm
Temperature Range: -20°C ~ + 50°C
Discharge Time: 18seconds
Discharge Range: 5meters
2. Packing Size:
3. Loading and Shipment of Fire Extinguisher
Fire extinguisher are dangerous goods under IMO 1044 class 2.2 by international sea bureau so all the shipment must shipped as DG cargo.
a. All cartons must stick IMO green label
b. All container must pull green net
c. Danger shipping mark "1044"
4. Fire Extinguisher Operation Instruction
a. Quickly take extinguisher at a site, extend to 7 meters away to the fire;
b. Shaking cylinder up and down before use, to loose the inside powder;
c. Take out the discharge hose, then safety pin;
d. Hold the hose with one arm, aim the nozzle of the fire;
e. Push the handle, sweep side to side;
f. Keep upright position during powder spray, do not lying, upside down.
5. Fire Extinguisher Maintenance
a. Fire extinguisher is pressure vessel, should prevent collision during the transportation;
b. Should placed within reach and in a dry and ventilated place at a temperature of -10°C~+45°C;
c. Preventing damps, solarization;
d. The parts in good installed, check it frequently;
e. Regularly check if inside powder is caking, replace if yes;
f. Regularly check if gauge pointed in green area, to find lower or overcharge gas, refill them by the pointer's condition;
g. Recharge immediately after complete or partial use;
h. Cylinder should be Hydraulic Tested every 5 years, qualified them can be used.