50KG Wheeled Carbon Steel CO2 Fire Extinguisher for Oil Station Using with ISO Approval
Cylinder size: D219*H1330(two cylinders)
Cylinder thickness: 5.2mm
Material: 34Mn2V
One cylinder 25KG CO2 Fire Extinguisher main specification:
| Capacity |
25KG CO2 |
| Agent |
99% pure CO2 |
| Cylinder Size |
D219*H1330mm |
| Cylinder Thread |
PZ 27.8 |
| Cylinder Thickness |
CK45-5.2mm |
| Valve Size |
Hand wheel valve |
| Hose Size |
Black rubber hose with horn, length: 5M |
| Siphon Tube Size |
M10*1*1300mm |
| Trolley |
Black steel trolley with rubber wheel |
| Fire Class |
144 B C |
| Temperature Range |
-10°C~+55°C |
| Working Pressure |
150Bar |
| Test Pressure |
250Bar |
All CO2 Fire Extingusher Model:
Portable type: 2KG, 3KG, 5KG, 6KG, 7KG, 8KG, 9KG;
Trolley type: 10KG, 12KG, 25KG, 50KG.
Operating Instruction of CO2 Fire Extinguisher:
1. Should wear a glove when using to avoid frostbite;
2. Take out the discharge hose, then safety pin;
3. Hold the hose with one arm, aim the nozzle of the fire;
4. Push the handle, sweep side to side;
5. Keep upright position during powder spray, do not lying, upside down
Maintenance of CO2 Fire Extinguisher:
1. Fire extinguisher is pressure vessel, should prevent collision during the transportation;
2. Should placed within reach and in a dry and ventilated place at a temperature of -10°C~+45°C;
3. Preventing damps, solarization;
4. The parts in good installed, check it frequently;
5. Regularly check if inside powder is caking, replace if yes;
6. Regularly check if gauge pointed in green area, to find lower or overcharge gas, refill them by the pointer's condition;
7. Recharge immediately after complete or partial use;
8. Cylinder should be Hydraulic Tested every 5 years, qualified them can be used.
Audited Supplier 
){kind=link}
){kind=link}