Model no.:BTF11-A
Produce standard: America ANSIZ358.1-2009
Design pressure:0.8Mpa
Work pressure:0.2-0.4Mpa
Water inlet size:RC1-1/4,height 1520MM
Water outlet size: RC1-1/4,height 90MM
Shower nozzle flow rate:120-180L/min
Eye wash nozzle flow rate:>12L/min
Eye wash total height 2340MM
Shower nozzle height 2150MM
Eye wash nozzle height 1050MM
Working medium: normal temperature water,meet health standard
Material:special 304 stainless steel that conforms to the national standard.All spare parts nickel content is more than 8%.Before processing should be pass pickling passivation, acid, alkali, salt,oil chemical material corrosion resistance stronger than the 304 stainless steel without pickling passivation.All casting parts are using silica sol process of casting, there will be no blister or bad defects like pores,relative to the density of sand mold casting process and higher strength,high service life of more than two times.
Anticorrosive coating:All parts should pickling phosphating before coating,ABS powder outdoor use special powder electrostatic spraying, powder adhesion is strong, not easy to fade, not easy to take off the floor.It has strong acid,alkali, salt, oil chemical material corrosion.
Switch mode: manual, this product can be equipped with other high-performance pedals,hands and feet, operation more convenient and quick) when using the function of eye just push push valve with handle gently, clean water from washing the eye automatic sprinkler, sprinkler peripherals dust cover, when used with flow automatically. The dust cover with good after reset. Use shower function just down gently with the hand shake handshandle pull rod, drench water from the shower nozzle jet, quickly with good nudging upwards after shower rod, close the shower switch.
Switch structure: eye and drench switch used two chip cock ball valve, the valve stem is
equipped with independent sealing device, than ordinary switch longer service life and
maintenance more convenient.
Eye nozzle built-in double filter, filter impurities in water, the other use slow pressure
principle makes the water flow into foamy water, effectively prevent to the injured eye due
to water flow ultra secondary damage nerve and the injured area. Relative to the traditional
eye bath, wash the eye effect is better, safer!
This product is suitable for use in indoor or temperature above 0 ºC environment, should pay
attention to below 0 degrees and environment freeze protection of pipes.
Application places: widely used in nuclear power, power plants, pharmaceutical, medical, chemical,
petrochemical, shipbuilding, electronics, metallurgy, smelting, printing, dyeing, education and
scientific research units, etc.
Packing details:use polyron packing,good protect,then 1set inton brown carton.
| NAME |
QTY/CTN |
N.W/CTN |
G.W/CTN |
CBM/CTN |
CTN SIZE |
| DESCRIPTIONS |
pcs |
kg |
kg |
M3 |
cm |
| compound type emergency safety eye wash |
1 |
12.00 |
13.00 |
0.052 |
74*29*24 |
Audited Supplier 
){kind=link}
){kind=link}