| Customization: | Available |
|---|---|
| Agent: | Dry Powder |
| Type: | Portable Fire Extinguisher |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1KG ABC Dry Chemical Powder Small Fire Extinguisher with steel bracket
Features and Applicated :
Ammonium Phosphate Chemical powder ABC
Sodium Bicarbonate Chemical powder BC
suitable for combating fires:
Common Combustibles, Flammable Liquid and Gas, Live Electrical Equipment, Combustible Metals, easier clean up after fire.
1. Size of 1KG Dry Powder Fire Extinguisher
2. Specification of 1KG Small Fire Extinguisher
Cylinder Size: Diameter 90mm, Height 240mm
Thickness: 0.9mm
Neck Ring: M30*1.5
Bottom Shape: Curls base
3. Packing of 1KG Small Fire Extinguisher
10PCS/CTN
Size: 47*19*33cm
G.W: 19.5KG
CBM: 0.029
4. Component of 1KG ABC Dry Powder Fire Extinguisher
White nylon nozzle, thread: M10*1.5
Brass valve without hanger loop, small black handle, 4 threads
Pressure gauge, Dia 37mm, thread: M10*1-12.5, 195Psi
Black red bracket
PVC siphon tube, thread: M16*1.5, length: 200mm
Warm Tips:
Fire extinguisher are dangerous goods under IMO 1044 class 2.2 by international sea bureau so all the shipment must shipped as DG cargo.
1. All cartons must stick IMO green label.
2. All container must pull green net.
3. Danger shipping mark "1044"
Some other 1KG Small Fire Extinguisher you might intersted in
| Fire Extinguisher Operation Instruction |
1. Quickly take extinguisher at a site, extend to 7 meters away to the fire;
2. Shaking cylinder up and down before use, to loose the inside powder;
3. Take out the discharge hose, then safety pin;
4. Hold the hose with one arm, aim the nozzle of the fire;
5. Push the handle, sweep side to side;
6. Keep upright position during powder spray, do not lying, upside down.
| Fire Extinguisher Maintenance |
1. Fire extinguisher is pressure vessel, should prevent collision during the transportation;
2. Should placed within reach and in a dry and ventilated place at a temperature of -10°C~+45°C;
3. Preventing damps, solarization;
4. The parts in good installed, check it frequently;
5. Regularly check if inside powder is caking, replace if yes;
6. Regularly check if gauge pointed in green area, to find lower or overcharge gas, refill them by the pointer's condition;
7. Recharge immediately after complete or partial use;
8. Cylinder should be Hydraulic Tested every 5 years, qualified them can be used.
This Car fire extinguisher also suit for following place
){kind=link}