Mexico Type Portable Dry Powder Empty Fire Extinguisher

• Customization: Available
• Name: Type Portable Dry Powder Empty Fire Extinguisher
• Valve: Aluminum Valve Without Hanger Loop
• Capacity: 2kg ABC
• Cylinder Size: D110*H310mm
• Thickness: 1.2mm
• Thread: G 3/4"
• Transport Package: Carton
• Trademark: Welfare
• Origin: Zhejiang, China (Mainland)

Product Description

Mexico Type Portable Dry Powder Empty Fire Extinguisher
 

1. Product specification:

Cylinder size: DIA*HEIGHT: D110*H310mm

Neck ring size: G 3/4''

Bottom shape: inside weld

Thickness: 1.2mm
 

 

2. Product accessories:

Nozzle: Blue nylon nozzle

Valve: Aluminum valve without hanger loop, small blue handle

Gauge: Diameter 37mm, Thread: NPT 1/8'',  Surface: 1.2

Siphon tube: PVC, Thread: M16*1.5, Length: 230mm

Bracket: Steel red bracket

Tamper sealing: Yellow plastic, Length: 250mm

Cylinder paints: 7325 red painting

 

3. Shipment packing details:

each 2KG ABC Fire Extinguisher packed with one plastic bag,  then put in carton

carton size: 14*14*41cm

gross weight of carton: 3KG

 

Fire Extinguisher Operation Instruction

1. Quickly take extinguisher at a site, extend to 7 meters away to the fire;

2. Shaking cylinder up and down before use, to loose the inside powder;

3. Take out the discharge hose, then safety pin;

4. Hold the hose with one arm, aim the nozzle of the fire;

5. Push the handle, sweep side to side;

6. Keep upright position during powder spray, do not lying, upside down.

 

 

Fire Extinguisher Maintenance

1. Fire extinguisher is pressure vessel,  should prevent collision during the transportation;

2. Should placed within reach and in a dry and ventilated place at a temperature of  -10°C~+45°C;

3. Preventing damps, solarization;

4. The parts in good installed, check it frequently;

5. Regularly check if inside powder is caking, replace if yes;

6. Regularly check if gauge pointed in green area, to find lower or overcharge gas, refill them by the pointer's condition;

7. Recharge immediately after complete or partial use;

8. Cylinder should be Hydraulic Tested every 5 years, qualified them can be used.