| Customization: | Available |
|---|---|
| Discharge Time: | 16 |
| Filling Weight: | 6L |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Dry powder empty fire extinguisher
Inside can filled ABC and BC dry powder ,
Specification of BC dry chemical powder fire extinguisher
Parts of dry powder fire extinguisher
Package of dry powder fire extinguisher
The difference between Wofu BC dry powder fire extinguishers' quality and other factories'
Picture of loading fire extinguisher
Detail of dry powder fire extinguisher
| 5KG PAKISTAN BC FIRE EXTINGUISHER | |||||||
| ITEM | TECHNICAL SPECIFICATION | ||||||
| POWDER | BC 40% | ||||||
| CYLINDER SIZE | Seamless, D150*H430mm | ||||||
| NECK RING | M30*1.5 | ||||||
| BOTTOM SHAPE | Curls base | ||||||
| THICKNESS | 1.2mm | ||||||
| VALVE | Brass valve with hanger loop, middle black handle | ||||||
| GAUGE | Diameter: 25mm, Small thread: M8*1 | ||||||
| HOSE | PVC, Thread: M16*1.5, Length: 520mm | ||||||
| SIPHON TUBE | PVC, Thread: M16*1.5, Length: 395mm | ||||||
| HOOK | Steel Wall Hanger | ||||||
| TAMPER SEALING | Yellow Plastic, Length: 250mm | ||||||
| CYLINDER PAINTING | 7325 Red Painting | ||||||
| TEMPERATURE RANGE | -20°C~+55°C | ||||||
| WORKING PRESSURE | 14Bar | ||||||
| TEST PRESSURE | 27Bar | ||||||
| DISCHARGE TIME | ≥ 14S | ||||||
| DISCHARGE RANGE | ≥ 4M | ||||||
BC fire extinguisher manual instructions:
1. Should wear gloves when using fire extinguisher, to avoid frostbite skin;
2. Quickly take extinguisher, standing 7 meters away the fire;
3. Shaking cylinder up and down before use, in order to loose powder inside cylinder;
4. Take discharge hose and then safety pin out;
5. Hold hose with one hand, aim nozzle to the fire;
6. Hold the handle, sweep fire side to side;
7. Keep extinguisher upright during spraying, do not lying.
BC fire extinguisher maintenance
1. Fire extinguisher is pressure vessel, should prevent collision during transportation;
2. Extinguisher should placed in dry and ventilated place, temperature range: -10°C~+45°C;
3. Preventing damp, exposure;
4. Check the parts of extinguisher frequently;
5. Regularly check powder filled, if it is caking, refilled new and good powder;
6. Regularly check gauge, the pressure is lower or overcharged if its point isn't in green area, refill according to the position of point;
7. Recharge fire extinguisher immdiately after partial or complete use.
8. Fire extinguisher is supposed to do 2.5Mpa hydraulic test after refilled or used for 5 years, it can be used again after passing the test.
Check fire extinguisher frequently to make sure:
1. Insurance device doesn't damaged or lost
2. There is no obvious damage, corrosion, leakage or nozzle blockage phenomenons.
3. Gauge reading is supposed to be within working pressure range.
Tips & warnings
1.Inspect fire extinguisher at least once a month.
2. The needle should be in the green band on the gauge.
3. Make sure you read your instruction manual carefully. Some fire extinguishers need to be shaken from time to time to prevent the contents from settling.
){kind=link}