| Customization: | Available |
|---|---|
| Certification: | CE |
| Max Working Pressure(50ºC): | 14.4MPa |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High pressure CO2 fire extinguishing system
| 1.CO2 fire suppression system breif introduction: |
1. Features and advantages:
Clean and low toxcity
Inert
Without residual after extinguishing
Easy to source,produce and economic idea
2. Operational principle
Suffocated, Total flooding type
Cooling and temperature drop
3. Apply to
Eletrical plant ,power stantion
Printing factor
Oil tank, painting factory
Etc easy be fired area ,room or production line
Also be applied to computer room
libray ,file room,communication center
4.Parts and accessories:
a. Electrical parts:Fire control panel system, smoke/heat/photic detector system,alarm system(fire bell,manual call point,vidio-audio alarm)
b.Equipment:cylinder,valve,solenoid valve,liquid one way valve,check pipe,pressure switch,nozzle,pipe etc.
| 2.CO2 fire suppression system main technical data: |
|
MODEL |
40LTR |
70LTR |
|
WORKING PRESSURE (MPa) |
5.17 |
5.17 |
|
DICHARGE TIME (S) |
≤60 |
≤60 |
|
FILLING WEIGHT/BOTTLE |
22.5 |
42 |
|
CAPACITY (LTR) |
40 |
70 |
|
WORKING TEMPERATURE |
0~49 |
0~49 |
|
NOZZLE WORKING PRESSURE (MPa) |
≥1.4 |
≥1.4 |
|
LEAKAGE DECTOR |
10% |
10% |
|
HEIGHT OF PRECTED OF NOZLLE (m) |
0.3-6.5 |
0.3-6.5 |
|
SYSTEM ACTING MEANS |
AUTOMATICEMERGENCY MANUAL,MACHINICA |
|
|
EXTINGUISHING WAYSS |
TOTAL FLOODING,PART FLOODING |
|
|
SYSTEM WORKING POWER |
24V,1A |
24V,1A |
|
WORKING RESSURE OF SELF RELEASE PRESSURE (MPa) |
15±0.75 |
15±0.75 |
|
ACTING PRESSURE OF CYLINDER SAFETY RELASE (MPa) |
7.0±0.35 |
7.0±0.35 |
|
RETARDING TIME OF SYSTEM (s) |
≤30 |
≤30 |
| 3.CO2 fire suppression system main products: |
3.1-1 Cylinder:
Volume: 70LTR; N.W:78KG
Diameter * height : 1500* 267mm, Thickness: 5.7mm to 6.3mm
Working pressure: 15MPa, Material: " 37Mn
3.1-2 Cylinder valve:
Material: brass Working pressure: 15MPa , thread: PZ39, hose thread: G5/8, release pressure:19 ±0.95
Consist of: valve body, gas chamber, pressure arm to sealing CO2.
In fire harzounds, controlled by manual, automatic open the valve to release to gas.
Valve connected with: dip tube, discharge hose.
3.1-3 Hose pressure hose: Dia: 12mm, working pressure: 15 MPa, thread G5/8, length:450 mm
3.1-4 Liquid one way valve: be used between manifold pipe and high pressure hose, prevent gas
flow back to storage cylinder. Working pressure:15 MPa, valve actuated pressure: ≥0.15 MPa, thread: M27/ G5/8.
Scale device gas loss: if less than 4kgs, output by signal, powder DC 24 V, rate voltage:1.5 A
Manifold pipe: combinate all the stored cylinder, be installed cylinder racket.
Material: steel 20#, thread M27/M16, max working pressure: 15MPa
Safety release valve: be installed on manifold pipe, for release high pressure exceed the requested gas release:15± 0.75MPa, thread:M16
3.1-5 Selective valve: be used in combination system.
3.1-6 Pressure switch: be installed on manifold pipe (for independent system )
If selective installed on select outlet, when the gas are discharge, output on signal to control
panel center actuated:0.2MPa, power:24DCV, rated voltage:1.5A
3.1-7 Pipe and connection: not supplier
3.1-8 Total flooding nozzle: terminal end of the pipe, discharge mouth for the agent with cover
total flooding nozzle and no cover flooding nozzle, or side working nozzle dependent the
designation.
| 4.CO2 fire extinguishing system packing: |
Use bubble bag wrap the cylinder and accessories,then packing into wooden case,good protect the goods avoid crash.
){kind=link}